Hump Mold 15" Charger Plate

The Ceramic Shop - Hydro Hump Mold- Plate, 15"

Item# HHM15P
MPN: HBHM15C

- It fits a standard wheelhead with bat pins 10" apart.

- The Hydro-Bat Hump Mold is a bat that you attach to your wheel-head and use while throwing. The mold attaches to the wheel with two rubber grommets embedded into the underside of the hydro-stone. After placing the hump mold on the wheel simply lay a slab on top of the hump mold. So think of it as throwing the backside of a form. You will still have to throw a foot by gathering clay from the slab or by attaching a coil and compressing it to the back. Hydro-Bat Hump molds allow beginners and professionals to consistently make forms with ease.

- All Hydrobats are made from hydrostone plaster to absorb moisture like regular pottery plaster but with extra strength to prevent chips and cracks.
* Hydro-Stone is a US Gypsum material containing cement and crystalline silica so it’s very absorbent, AND very strong -- you will find the surface of our bats to be scratch resistant, while the bats’ water-absorbing properties fully eliminate the need to cut your pieces off of the bat with a wire.