SG406 - Brown Liner Cone 06-10, 1oz

** Remove the white cap then gently puncture plastic tip with the 
metal writer tip.

** After placing the metal tip onto the bottle cap, push the included pin through the 
small ziptop bag and seal (this makes it easier to keep track of the pin). Turn the 
bag into a flag!

** Keep the pin in the metal writer tip when not in use.

** Designer Liner is clay based. As such, it is the nature to dry quickly, which 
can promote clogging in the narrow passages of the metal and 
or plastic tips.

** Clear or transparent glazing is necessary for gloss finish. Designer Liner will fire 
matte when no glaze is applied over top.

** Design work could be distorted when applied on top of moving glazes. Such as, 
Elements™, Crystal or Stoneware glazes.

** Wipe tip periodically on a damp sponge to keep clean.

** Keep the metal pin to unclog the tip and keep the metal writer tip free 
from debris.

** If Designer Liner begins to dry in the bottle you can add a few drops of water to 
reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small 
amounts to avoid over-thinning the Designer Liner.

** Place some Designer Liner on a tile and use a CB-110 #10/0 Liner Brush 
for extra fine outlining or detailing.

** Designer Liner is not a dimensional product. If applied too thick or heavy, 
Designer Liner will crack and possibly pop off.

** The 1.25 oz. squeeze bottle fits nicely in the hand, permitting complete 
control and refinement for outlining, drawing, and detailing. Works great 
with Fundamental Underglazes!