New Barnard (Sub for SG1132) (50# Bag)

Barnard clay has long been used by potters as a source of iron in dark firing glazes. It offers price advantages over using iron oxide and being a clay aids in suspending the materials in the slurry. Barnard has proven valuable for iron slip glazes requiring high clay content. For example, a mixture of 90% Barnard and 20% calcium carbonate will produce a nearly black glaze around cone 9.

Published chemistries appear to be highly variable. We have seen iron amounts as low as 14% and as high as 34% (the other oxides are likewise variable). While it might seem obvious that more MnO than quoted is needed to get color this dark, the Laguna substitute does not contain it either.

Barnard clay is a silty material with very low plasticity; so low that it is difficult to form test specimens from it in the plastic state (yet the drying shrinkage is around 4%!). The material is extremely messy to work with and stains containers and everything it touches. There is some variation in the color (and thus of the fired results of glazes and slips employing it).

Fired bars are very dark brown at cone 04 proceeding to black at cone 3 (by cone 6 it is beginning to melt). Cone 04 porosity is around 10% but drops sharply to 2% by cone 2 and to near zero by cone 4 (higher firing begins to expand test bars). Fired shrinkage is very high at all temperatures (above 10% even at cone 04).

To duplicate this material the base clay needs to have low plasticity and be high in iron and silica and low in alumina and flux. Since iron oxide and silica need to be added, flux-containing clays could possibly be diluted enough to work.