)
)
PC-72 Fire & Ice Cone 5/6, Pint
ITEM#: PPC72
UPC#: 039672354883
MPN: 35488K
CONE 5/6 OXIDATION:
- PC-72 Fire & Ice is deep red where thick and icy blue where thin. Fire & Ice is a reduction copper red for electric firing with a dramatic icy blue-colored break on texture.
** Safety Warning: Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Product Description
* PC-72 Fire & Ice is deep red where thick and icy blue where thin.
* Fire & Ice is a reduction copper red for electric firing with a dramatic icy blue-colored break on texture.
* Apply three coats for best oxblood red color.
* Layers well over AMACO Celadons, other Potter's Choice and Satin Matte glazes.
* Glaze layering fired results may run if paired with a runny glaze.
* We recommend testing any layering combination prior to putting it on a full ceramic piece.
* Shake well before use.
* For best results, do not thin the glaze and apply 3 brush coats to Cone 04 bisque. (Let the glaze dry between coats.)
* Glaze fire to Cone 5-6.
* Due to variations in raw materials used during manufacturing, we recommend firing glazed test tiles before using each new batch number of glaze.
** Safety Warning: Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
(PC) Potter's Choice
Reduction Effects in Oxidation | Variety of Colors and Surfaces | Cone 5 - 6 | Limitless Layering Combinations!
* The Potter's Choice glaze series was designed with the potter in mind! These stunning glazes add fluid colors and effects to smooth or textured ware, with optimal results at Cone 5/6.
* To use these glazes is to step into different ceramic glaze traditions of many cultures throughout history.
* Check out our PC Layering charts to see all the amazing results you can try in your own studio!
Cone 5 = 1184°C (at 150°C/hour for the final 100°C of firing) / 2201°F ( at 270°F/hour in the final 200°F of firing)
Cone 6 = 1241°C (at 150°C/hour for the final 100°C of firing) / 2266°F ( at 270°F/hour in the final 200°F of firing)
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend